Blog menu

Registering Screen Printed Layers on Fabric using acetate registration sheet

Registering Screen Printed Layers on Fabric using acetate registration sheet

You will need:

  • Mount board cut into an ‘L’ shape right angle
  • A plastic sheet such as Mylar Film with a true right angle on the bottom left-hand corner. It is useful to put some coloured tape on this corner to make it more rigid and easier to see

Line up the bottom left-hand corner of the plastic sheet with the inside edge of the mount board right angle. If you are using a paper stencil, place the stencil in position on top of the plastic.

Align the screen with the inside edge of the mount board right angle.

Print the image onto the plastic sheet.

 

Remove screen and check alignment. If you are not happy, realign the film and the mount board right angle.

Remove the plastic sheet but keep the mount board right angle in the same position. Align your screen with the mount board right angle and print.

The image is now printed onto the fabric in the correct position.

Align the next print on top of the next image and position the mount board right angle at the bottom left-hand corner. Use the mount board corner to align
the screen.

Continue until the fabric is printed. This method is really low tech and you have lots of flexibility with rotation, positioning etc.

The film can be wiped clean with a damp cloth.

Here’s one we made earlier!

 

Back to blog